CABLE TRAY BEND 90 is used in places where the cable route changes with a 90 degree angle. It is made in two hot and cold plating modes (in wet areas) and four bends or Six bends of the knee are used according to the customer’s order and based on the type of cable tray…

45 degree cable tray bend or CABLE TRAY BEND 45 is used in places of the cable route where the cable route is changed at an angle of 45 degrees. It is made in two modes of hot plating (in wet areas) and cold (galvanized fabric) and Four bends or six bends are used according..

Lorem Epsom is a fake text with the production of incomprehensible simplicity from the printing industry, and using graphic designers, printers and texts but also newspapers and magazines in columns and rows as necessary, and for the current conditions of technology required, and diverse applications with the aim of improving tools It is practical, many..

REDUCER FOR CABLE TRAY is used in places where the volume of cables is reduced (reducer conversion) or the volume of cables is increased (increase conversion). The conversion width starts from 100 mm and up to 1000 mm is variable. The height or conversion wall is made from 20 mm to 250 mm. The length..

Converting to the right cable tray or RIGHT REDUCER FOR CABLE TRAY is used in places where the volume of cables is reduced (reducing conversion) or the volume of cables is increased (increasing conversion). Also, the direction of reducing or increasing the conversion can be to the right, left or middle. The conversion width starts..

The cable tray system has significant advantages over other wiring systems. Cable trays are cheaper and more reliable, more adaptable to changes, and easier to maintain. In addition, the cable tray is designed to avoid potential safety issues that exist in other wiring systems. Price: Experience has shown that the initial price of cable tray..

Cable tray is one of the construction equipment used for cabling and wiring of buildings. The cable tray accommodates the wires and, in addition to sorting, maintains the safety of the building’s wiring. The cable tray can be used in different environments and places. (Closed space, open space, humid environments, high-risk environments, as well as..

Before choosing the right cable tray for your cabling system and deciding on the features and maintenance and support methods required for it, it is better to consider some considerations. 1- Where is the cable tray supposed to be used? Installation location and installation considerations: The position and place where the cable tray is installed..

A fuse is an electrical/electronic device that protects a circuit from various electrical faults such as current and overload. Fuses can be considered as a sacrificial element in a circuit, as they act as a weak link in the entire circuit. they do. A simple fuse consists of a small conductive material with low resistance..

Insulation is usually used to prevent the cable tray from catching fire. Care must be taken in choosing the insulation because if the insulation itself is combustible and catches fire, the fire will spread to the entire wiring system. Therefore, insulation must be used. used anti-combustion. Insulations have different thicknesses and weights, and this weight..