Cable tray ignition

Insulation is usually used to prevent the cable tray from catching fire. Care must be taken in choosing the insulation because if the insulation itself is combustible and catches fire, the fire will spread to the entire wiring system. Therefore, insulation must be used. used anti-combustion. Insulations have different thicknesses and weights, and this weight and thickness is needed for the cables of the cabling system. Also, the size of the insulation is effective in reducing the heat loss of the cables.

Click here to know the price of cable trays.

Iron cable trays, based on their metal property, expand easily with heat and transfer a lot of heat to the insulation, so soft, plastic or fibrous insulation should not be used, and strong and thick insulation should be used instead.

As we know, PVC and fiberglass cable trays are combustible, and we can reduce the possibility of fire with fireproof insulation.

Also, there is a way that reduces the speed of cable tray combustion is the periodic cleaning of cable trays in the cabling system because the dust sitting on the cable tray accelerates the combustion.

Tags : test

Cable tray elbow 90 degrees

CABLE TRAY BEND 90 is used in places where the cable route changes with a 90 degree angle. It is made in two hot and cold plating modes (in wet areas) and four bends or Six bends of the knee are used according to the customer’s order and based on the type of cable tray…

45 degree horizontal knee of the cable tray

45 degree cable tray bend or CABLE TRAY BEND 45 is used in places of the cable route where the cable route is changed at an angle of 45 degrees. It is made in two modes of hot plating (in wet areas) and cold (galvanized fabric) and Four bends or six bends are used according..

Cable tray tee

Lorem Epsom is a fake text with the production of incomprehensible simplicity from the printing industry, and using graphic designers, printers and texts but also newspapers and magazines in columns and rows as necessary, and for the current conditions of technology required, and diverse applications with the aim of improving tools It is practical, many..

Converting the middle of the cable tray

REDUCER FOR CABLE TRAY is used in places where the volume of cables is reduced (reducer conversion) or the volume of cables is increased (increase conversion). The conversion width starts from 100 mm and up to 1000 mm is variable. The height or conversion wall is made from 20 mm to 250 mm. The length..