Cable ladder tee

CABLE LADDER TEE is used in places of the cable laying route where the cables meet in one point from three directions and a three-way mode is created. It is made in hot plating mode (for wet areas) and cold It has two types, four bends or six bends. The width of each opening of the tee varies from 100 mm to 1000 mm. The wall height is from 20 mm to 250 mm and the thickness of the sheet used in hot plating is from 1.25 to 2 and in cold form from It is 0.6 to 2. It can be used with a door or without a door according to the request. The type of connection of the base to the body can be of two types: welding or bolting, and the distance between the steps can be 25 cm or 30 cm. be made